Loading Loading...
Español | info@yamazen.com.mx | +52 (472) 748 6400

Calipers

- Digimatic: No need for tedious origin restoration, measurement can be started at any time and there is no restriction on operating speed.

- Calipers: Basic and simple design, with stepped graduation surface prevents the entry of dust between scale and cursor. You can measure exterior and interior dimensions, depth, and steps.

- Digimatic height gauges: Set from the origin (ABS measurement mode). Any arbitrary value can be stored as the point of origin.

- Linear height: System for flexible measurements in 2D of super high accuracy and use on the shop floor

- Depth gauges

Mitutoyo calipers are an instrument to measure external diameters, internal diameters and depths that due to its characteristics are used in the industrial area more properly. The calipers can also be defined as auxiliary scales, which are used to subdivide the smallest graduations on the scale of the caliper bar.

The level of accuracy that a caliper provides is due to the quality of the graduation of its scales, that is, the accuracy with which they have been calibrated, as well as the design of the cursor guides, parallelism and perpendicularity of its probes. .

The most common is that a caliper has satin chrome finishes, as this material eliminates reflections, it is manufactured with stainless steel, thereby reducing corrosion, or in carbon steel, the hardness of the probe surfaces ranges from 550 and 700 vickers depending on the material used and what the standards establish.

A very delicate measuring instrument that needs to be handled with great skill, and above all caution, avoiding scratches or risk of bending, which could affect its effectiveness and precision. The use of any instrument must be more careful than that of tools.

Click here to request a quote for Mitutoyo Calibrators in Mexico

Features

DIGIMATIC ABSOLUTE TECHNOLOGY

An electronic measurement scale that gives you direct reading of the absolute linear position when turned on, without the need to be zeroed or reset.

DUST AND WATER RESISTANT

Series available with IP codes, which indicate the degree of protection provided for the electronic operation of a product.

COMPATIBLE WITH 'U-WAVE'

Allows data entry to commonly available software via keyboard input.

Machine Specifications

SERIES INTERVAL WEIGHT
500-776-785 1 - 200 mm / 0 - 8 inch 180 - 210 g
500-702-754-10 0 - 300 mm / 0 - 12 inch N/A
500-150-166* 0 - 300 mm / 0 - 12 inch N/A
500-500-507-10 0 - 450 mm / 1 -40 inch N/A
500-443-475 0 - 200 mm / 0 - 8  pulg N/A
530-102-502 0 - 1000 mm / 0 - 8 inch N/A
532-101-121 0 - 280 mm N/A