Loading Loading...
Español | info@yamazen.com.mx | +52 (472) 748 6400

CLIPIKA ACE Mold Cleaning Machine

The CLIPIKA ACE Mold Cleaning Maching combines ultrasonic waves, electrolysis and alkaline cleaning solution. The synergetic effect of electrolysis, ultrasonic wave and specified cleaning solution recovers the same level of brightness as new molds without damaging them; rust, oxide, rubber and adhesion, soot burn, all are removed by the CLIPIKA ACE.

Made-on-Order / Customized Solutions available!

Rust and dirt accumulate on casting mold from many sources: casting molds may rust during storage (humidity, air dust), because of direct handling (because of skin acids, oils and dirt), all these are directly caused by improper maintenance and cleaning. Microscopic ditches capture corrosive dirt, which is pushed into the mold during the operation causing rust. However, this dirt can't be removed manually with brushes and solvents, and then, covering anti-rusting agents will turn residual resin into phtalic acid, corroding the mold.

The CLIPIKA cleaning process permeates the cleaning solution into the dirt and then the electrolysis gas generated from the cleaning solution because of the electrolytic reaction.

Also, the use of a combined ultrasonic/electrolytic reduces the potential ultrasonic-related mold damage.

Features

MOLDS DO NOT RUST IN STORAGE!

Use your molds directly from storage without further servicing!

INCREASE MOLD PERFORMANCE!

Used-mold shots will increase while maintenance will decrease!

EASIER MOLD CLEANING AND MAINTENANCE!

Get the same best results on every cleaning without organic solvents!

Machine Specifications

MODEL CAPACITY (liters) FEATURES POWER CONSUMTION WEIGHT MOLD CAPACITY DIMENSIONS
CPIII-30-P11 30L Easy-to-operate standard type 1400W 88kg 200 (W) X 400 (D) X 70 (H) mm 700 (W) X 630 (D) X 970 (H) mm
CPIII-66-P15 66L High efficiency type with a large cleaning tank for batch cleaning. Dewatering mechanism. 1700W (2800W w/ heater) 118kg 270 (W) X 420 (D) X 100 (H) mm 800 (W) X 670 (D) X 1062 (H) mm
CPIII-115-P25 115L Large type for large mold cleaning. 2800W (5000W w/ heater) 190kg 500 (W) X 500 (D) X 120 (H) mm 1016 (W) X 756 (D) X 859 (H) mm
CPIII-250-P36 250L Ultra large type for cleaning the larger molds than 115L 3700W (5900W w/ heater) 135 600 (W) X 600 (D) X 160 (H) mm 1150 (W) X 870 (D) X 1050 (H) mm
CPE-30-P 30L Economy type equipped with carefully selected minimum required functions 1100 W 65kg 200 (W) X 400 (D) X 70 (H) mm 595 (W) X 585 (D) X 820 (H) mm