Loading Loading...
Español | info@yamazen.com.mx | +52 (472) 748 6400

Head Air Gage Micrometers

TOSOK's line of Pneumatic Measurement Micrometers (internal and external) offers ease of operation and consistency of results, regardless of the operator's ability, allowing quick on-site measurements and streamlining mass production.

The different types of NIDEC TOSOK Pneumatic Micrometers are:

  • Internal Measuring Pneumatic Heads (Inside Measuring Head Air Gage)
  • External Measuring Pneumatic Heads (Outsite Measuring Head Air Gage)
  • Jig Tire Measuring (Measuring Jig Head Air Gage)

- Monitors for pneumatic micrometers. Flow, Analogs and Digitals with Go / NoGo option. The micrometers show the results in different types of monitors. To know the variety of monitors, visit the displays page here.

Product Info

Features

DIVERSE INTERNAL MEASUREMENT CAPACITY

From micro measurement (1.2mm diameter) up to engine block bore measurements, the INSIDE HEAD AIR GAGE MICROMETERS are the right tool.

EASE OF OPERATION

The gages are very easy to use, so the staff training time is very quick and error-free

CUSTOMIZED EXTERNAL GAGE DESIGN

External measuring nozzles are design to fit specific client requirements, such as V-shaped or Ring-shaped nozzles in accordance to the shape of the work piece.

Machine Specifications

TYPE: MEASUREMENT STYLE AND FEATURES: USAGE: SPECS PDF LINK:
PA Type (internal)
  • This is a type which blows air against the work piece.
  • It is mainly used for the measurement of through hole.
It is mainly used for the measurement of through hole. Download specs
PB Type (internal)
  • This is a type which blows air against the work piece.
  • It can make deeper measurement than conventional PA type.
It is mainly used for the measurement of through hole. Download specs
PC Type (internal)
  • This is a type which blows air against the work piece.
  • It can make deeper measurement than conventional PB type.
It is mainly used for measuring a small hole of the through hole. Download specs
PKA Type
(Indirect internal gage)
  • This is a indirect type which make non-contact measurement using solid-carbide measurement point.
  • It is used mainly with the surface roughness being not less than 6 S ,or the width of the surface to be measured being not more than 4 mm.
  • Carbide point is at the middle of the probe.
Download specs
PKB Type
(Indirect internal gage)
  • This is a indirect type which make non-contact measurement using solid-carbide measurement point.
  • It is used mainly with the surface roughness being not less than 6 S ,or the width of the surface to be measured being not more than 4 mm.
  • Carbide point is at the tip of the measurement head.
Download specs
PO Type (External)
  • Shape to pinch work pieces.
  • One of the most popular measuring unit.
  • Measuring outside diameter of the all sort of cylindrical products.
Download specs
POT Type (External)
  • Shape to pinch work pieces.
  • Installing long-life solid carbide on V-surface so as to elongate durability.
  • Due to Anti-abrasion, this is good to use for all number of objects for longer life.
Download specs
POK Type (External)
  • This is a indirect probe which uses a solid carbide lever.
  • It is used mainly with the surface roughness being not less than 6 S and the width of the probe not more than 5 mm.
Download specs
POR Type (External)
  • This is a type of measurement in which a work pieces is inserted into the ring.
  • It is often used when work pieces are smaller.
Download specs
GAGE HEAD JIG TYPE
  • Improve measuring rate.
  • Up to 8 air-jets for several types of measurement
  • Stable measuring result can be obtained.
  • Possible to measure the points on which conventional hard gage can not do it.
  • Squareness, cylinder concentricity, coaxiality, slot width, parallelism, etc.
Download specs